Jump to content

Leaderboard


Popular Content

Showing most liked content on 02/24/16 in all areas

  1. 1 point
    Steve Mcleod

    Tony Montana (Scarface) weave

    148 x 202. Design threads - Madeira 60wt. Wrapping thread - Madeira 40wt.
  2. 1 point
    Steve Mcleod

    Laurel And Hardy Weave

    143 x 300. Design threads - Madeira #60wt, Wrapping thread - Bullards white linen size A.
  3. 1 point
    bigscale

    61st street pier galveston, texas

    a pic i took back during hurricane allen in about 1980 of the sixtyfirst street pier, while the t-head was being demolished, it was rebuilt one more time to the full size, but after hurricane alicia a few years later took it out again it was never restored to its full size, sure miss that t-head
  4. 1 point
    This is a custom handle/reel insert I turned from Alaskan Birch Burl. These pieces have a lot of birdseyes, burls and flame throughout. I used an aluminum downlocking slip ring hardware for the reel seat. Balances really nice on a 7'6" 3/4wt, 4pc Fly Rod.
  5. 1 point
    Dave donated this stunning Reel seat for the Team OC rod.
  6. 1 point
    Detachable fighting butt showing detail of the ebony butt cap consisting of a solid silver coin (three penny piece from Britain dated 1921) inlaid in recessed mammoth ivory. After the photo had been taken I realized that I had put the detachable butt the wrong way around so that the coin appears upside down in the photo! I suppose the photo could be redone, although I am certain that the general idea will be conveyed without the need for this!
  7. 1 point
    Barry Whitehouse

    Rod Alignment Dots

    Alignment dots make it easier to assemble a rod. It also prevents twisting/stressing the sections when aligning. On the female ferrules, I applied a layer of Flex Coat Lite over the wrap (let it cure), drew the dots with a silver gel pen, coated with Krylon Workable Fixatif (let it dry), then the final coat of FC Lite. On the male ferrules, I marked the dots on the bare blank (leaving space between male and female dots for future rod wear), applied fixative and I coat of FC Lite. The silver trim is a 2-turn band, learned from Ken Preston's web site video. Thread color is Gudebrod Garnet, with CP.
  8. 1 point
    Stripping guide on a Dan Craft Signature V, 3-piece, 10', 8 weight rod. American Tackle guide wrapped with Gudebrod black/white Classic Twist and Blue Metallic Inlays.
  9. 1 point
  10. 1 point
    Custom turned wood insert for Struble U-25 nickel silver hardware.
×